MACHINERY DESIGN LTD

Bul. "Tsar Osvoboditel" 63, office 5,
9000, Varna, Bulgaria

sales@machinerydesign.net

  • Български
  • English
  • Русский

EMCO Concept Turn 105

The PC-controlled 2-axis turning machine with table format not only easily fulfils all basic requirements for technical education and training but also manifests the finest technology: All precision components of the Concept TURN 105 such as headstock, slide, tool system, and tailstock are installed on a rigid, vibration-damping, gray cast-iron inclined bed. Generously sized motors ensure high feed forces and acceleration values. Pre-stressed, backlash-free circulating-ball spindles and an optimum guide ratio for the slides ensure stability and precision. The control for the Concept TURN 105 is connected via PC, on which the interchangeable WinNC control from EMCO can be installed.

Work area

Swing over bed: 180 mm (7.09")
Swing over cross slide: 75 mm (2.95")
Distance between spindle noses: 236 mm (9.29")
Max. turning diameter: 75 mm (2.95")
Max. part length: 121 mm (4.76")
Max. bar-stock diameter: 20 mm (0.79")
Height of centers: 90 mm (4.76")

Travel
Travel in X: 55 mm (2.17")
Travel in Z: 172 mm (3,54")

Main spindle
Speed range: 150 – 4000 rpm
Max. torque: 14 Nm
Spindle diameter at front bearing: 45 mm (1.77")
Spindle bore: 20.5 mm (0.81")

Main motor
Drive power: 1.9 kW / 2.6hp

Tool turret
No. of tool stations: 8
Tool-cross section: 12 x 12 mm (0.5 x 0.5")
Shank diameter for boring bars: 16 mm (0.63")
Turret indexing time: (T1/T2/T3=45°/180°/315°) 1.4 / 3.5 / 5.5 s

Feed drives
Rapid motion speed X/Z: 5 m/min (196.85 ipm)
Feed force X/Z: 2000 N
Work feed X/Z: 0 – 5 m/min
Positioning variation Ps (acc. VDI 3441) in X/Z: 5 μm (0.0002")

Tailstock
Quill stroke: 120 mm (4.72")
Quill diameter: 35 mm (1.38")

Manufacturer: